An affordable backup solution for SOHOs

With the emergence of the multicomputer home and the advent of large IDE drives, the need to back up 20MB to 50MB of data on a home network has become common. Yet, a tape backup device that offers 50MB capacity can cost more than $1000. The small office/home office (SOHO) owner has a hard time justifying this cost. After I explained this problem in "Client Backup Strategies," May 1999, dozens of readers suggested I check out products from OnStream. At that time, the company had just released the OnStream SC50 Internal SCSI drive for server and power-workstation backups.

Installing the SC50 was no different from installing any other internal SCSI device. I checked to make sure that the default internal SCSI drive, which I use in my server for low-speed peripherals, was free on the narrow SCSI chain. Then, I stuck the SC50 in a free half-height drive bay, connected the SCSI cable and the power cable, and put the case back together.

Next, I installed the OnStream Echo backup software, which OnStream provides with its drives. Although OnStream Echo isn't network backup software, I wanted to see how it would work. To test how well this software could back up a lot of data from various places on the network, I mapped local drives to network shares, then configured OnStream Echo to back up the local drives and the network shares. The software performed the backup at close to its speed rating of 7.2MBps. The software produced an error log after the backup's completion that showed a successful backup with the exception of open files on the local machine and the network systems.

Restoring files was quite fast because OnStream Echo keeps its file catalogs locally on the hard disk. I restored files to the hard disks and the remote systems without any problems. The longest restoration, which took less than 10 minutes, required finding a 110MB video file in the 37MB of backup material and writing that file back to the remote system. The file played correctly after the restoration. Searches and restorations of smaller files were faster.

I encountered a problem when I tried to run VERITAS Backup Exec for Windows NT. After I installed Backup Exec on the server, I couldn't get the software to recognize the media that I had used with the OnStream Echo software. I called the OnStream technical support line (which is 24 * 7 and free), and the representative told me that the VERITAS software has no facility for overwriting the OnStream Echo format. The representative suggested I use the usual NT backup utility (i.e., NT Backup) to reformat the media. The support representative believed that Backup Exec would understand the NT format and work correctly. I attempted to use NT Backup to reformat the media, but the utility also failed to recognize the formatted media. After I switched to a fresh 50MB cartridge, I encountered no problems using Backup Exec with the OnStream drive.

At $699 for a 50GB drive and $129.95 for a three-pack of 50GB Advanced Digital Recording (ADR) cartridges, the SC50 is a reasonably priced alternative to other tape devices in this capacity range. You can also buy a 30GB cartridge for $30 or a 50GB cartridge for $50. Given the inexpensive cost of the tape drive and the media, you would have difficulty finding a better tape backup system for a standalone server, power workstation, or SOHO.

The company also offers the 30GB OnStream SC30 Internal SCSI drive for $499 and the 30GB OnStream DP30 External Enhanced Parallel Port drive for $399. To ease migration to larger-capacity drives, all OnStream tape devices can read tapes that smaller-capacity OnStream drives created. The OnStream backup drives provide a fast, efficient, and cost-effective backup solution for small networks and large-capacity standalone systems.

OnStream SC50 Internal SCSI
Contact: OnStream * 303-772-9000
Web: http://www.onstream.com
Price: $699 for tape drive; $39.99 for 30GB Advanced Digital Recording cartridge; $50 for 50GB Advanced Digital Recording cartridge; $129.95 for three-pack of 50GB Advanced Digital Recording cartridges
System Configuration:
50GB internal SCSI tape drive, 30GB and 50GB Advanced Digital Recording cartridges, VERITAS Backup Exec for Windows NT, CD-ROM with OnStream Echo software and documentation

End of Article




You must log on before posting a comment.

If you don't have a username & password, please register now.

Reader Comments

I purchased one of these based on your article for my smaller sites. WHAT A NIGHTMARE. As far as I can tell the tape drive is defective, but onstream does have very much concern about their product. WASTED SO MUCH TIME with assuming it was something with my testing of this unit it makes me sick. THEY (ONSTREAM) claim it cannot work with most adaptec controllers (COME ON GUYS a SCSI COMMAND IS A SCSI COMMAND IN MY MANUAL). Just found out the hard way that the inexpensive advansys controllers have some gotcha's concerning support for various scsi commands but have never heard this about adaptec. Well changed controller models and mfg. still the same results tape drive just will not function. After all this onstream wants me to fill out a mountain full of paperwork etc..... Will do it sometime but this is the worst experience from a tape drive mfg. I have had in years. PITY those that do not have alot of experience. GIVE THIS THING A MISS....

Paul Powenski

I am stunned that a publication specializing in NT would review hardware that is not on the Microsoft hardware compatibility list. No small wonder the first response posted to this article told of a nightmare.

Granted, the HCL has flaws; I almost bought a tape drive on the list only to find out from the manufacturer's site (Sony) that there is no driver for NT4 with SP5.

If you do not believe the HCL has value, perhaps you could do an article explaining your reasoning.

Ernest Ostrander

The tech support number supplied in this article is no longer associated with Onstream.com. In fact I can't even find their web site any longer. Did they go belly up?

Rich

can't use the onstream sc30 under win xp

harry

Yes you can use it in XP. It depends on the software that you plan to use. If you use anything but the newer Echo software: http://www.hastec.nl/drivers/onstream/echosoftware.htm

then you *have* to load a driver in XP. The echo software has been updated.

uni

Anyone have a problem with the tape not inserting properly. When I try to push in the tape, it just pushes it back at me, with other tapes as well. The open/close button just blinks and not working. Anyone know of a source or newsgroup for the SC-50?

J Godfrey

Either my SC-50 or Echo 3.7.02 is not working right. I suspect Echo because reinstalling it restores operation for a while. Typically, the cartridge will not be recognized. Restarting with the cartridge inserted helps for a while and then even that fails.

Considering the price of the drive and tapes, I think two or three removable hard drives (chiild, father, grandfather) may be much better.

Wayne

I use the SC50 with BRU under Linux and Echo with Windows. How can I restore the Echo catalog after changing the HDD, is there a method of building a new Echo index from a tape, since the directory on the tape seems empty.

OomBas

OomBas

Thanks Much---Got me going in the right direction. At least I found the right site to get Onstream's software. Again THANKS!

Anonymous User

Article Rating 5 out of 5

I have had almost ZERO problems with our SC50 since installing it in 1999 into out NT Proliant 1600 server. Has been very dependable and has always bee there for our DR needs. Our of 15 tpaes we keep in our library, only (1) has failed in over 6 years. I WISH OnStream would get back onto their feet again and begin producing more of these types of drive.

Anonymous User

Article Rating 4 out of 5

I have been using the SC-50 in my Server 2003 now for about a year with Veritas 9 & it's performed flawlessly. Using the Veritas drivers is the key in 2003. It's even better when someone gives you 2 internal & 1 external w/a BOX of tapes for free :D

David

Anonymous User

Article Rating 3 out of 5

By the way, if you "need" drivers for OnStream products, here's the link where you can find them

http://www.hastec.nl/drivers/onstream/onstream_drivers_for_windows.htm

David

Anonymous User

Article Rating 3 out of 5

 
 

ADS BY GOOGLE