When using the HIERARCHYID datatype to represent graphs, in certain cases the values can become long. With very deep graphs this is natural, since the HIERARCHYID value represents a path of all nodes leading to the current starting with the root node. However, in certain cases even when the graph is not very deep, the path can become long. First I’ll explain the circumstances in which this can happen, and then I’ll provide a solution to normalizing the values, making them shorter.
HIERARCHYID values can become long when you keep adding new nodes in between two existing nodes that have consecutive values in the last numeric element in their canonical path. As an example, say you have two nodes with the following canonical paths: /1/ and /2/, and you add a node between them. You get a new value whose canonical path is /1.1/. Now add a value between /1.1/ and /2/ and you get /1.2/. Now add a value between /1.1/ and /1.2/ and you get /1.1.1/. As you can realize, if you keep adding nodes in between two existing nodes in this manner, you can get lengthy paths that represent lengthy HIERARCHYID values even when the graph is not deep.
If order among siblings is not important, you can add child nodes always after the last child, or always before the first, and this way, the paths will be more economic. But when order among siblings matters, you can’t control this. If you frequently add new nodes between existing ones you may end up with very long HIERARCHYID values. In such a case, you can periodically run a procedure that I will provide here that normalizes the HIERARCHYID values for the whole graph, making them shorter.
Uses the following code to create a table called Employees and populate it with sample data:
USE tempdb;
CREATE TABLE dbo.Employees
(
empid INT NOT NULL,
hid HIERARCHYID NOT NULL,
lvl AS hid.GetLevel() PERSISTED,
empname VARCHAR(25) NOT NULL
);
CREATE UNIQUE CLUSTERED INDEX idx_depth_first ON dbo.Employees(hid);
CREATE UNIQUE INDEX idx_breadth_first ON dbo.Employees(lvl, hid);
CREATE UNIQUE INDEX idx_empid ON dbo.Employees(empid);
GO
CREATE PROC dbo.AddEmp
@empid AS INT,
@mgrid AS INT,
@leftempid AS INT,
@rightempid AS INT,
@empname AS VARCHAR(25)
AS
DECLARE @hid AS HIERARCHYID;
IF @mgrid IS NULL
SET @hid = HIERARCHYID::GetRoot();
ELSE
SET @hid = (SELECT hid FROM dbo.Employees WHERE empid = @mgrid).GetDescendant
( (SELECT hid FROM dbo.Employees WHERE empid = @leftempid),
(SELECT hid FROM dbo.Employees WHERE empid = @rightempid) );
INSERT INTO dbo.Employees(empid, hid, empname)
VALUES(@empid, @hid, @empname);
GO
EXEC dbo.AddEmp @empid = 1, @mgrid = NULL, @leftempid = NULL, @rightempid = NULL, @empname = 'A';
EXEC dbo.AddEmp @empid = 2, @mgrid = 1, @leftempid = NULL, @rightempid = NULL, @empname = 'B';
EXEC dbo.AddEmp @empid = 3, @mgrid = 1, @leftempid = 2, @rightempid = NULL, @empname = 'C';
EXEC dbo.AddEmp @empid = 4, @mgrid = 1, @leftempid = 2, @rightempid = 3, @empname = 'D';
EXEC dbo.AddEmp @empid = 5, @mgrid = 1, @leftempid = 4, @rightempid = 3, @empname = 'E';
EXEC dbo.AddEmp @empid = 6, @mgrid = 1, @leftempid = 4, @rightempid = 5, @empname = 'F';
EXEC dbo.AddEmp @empid = 7, @mgrid = 1, @leftempid = 6, @rightempid = 5, @empname = 'G';
EXEC dbo.AddEmp @empid = 8, @mgrid = 1, @leftempid = 6, @rightempid = 7, @empname = 'H';
EXEC dbo.AddEmp @empid = 9, @mgrid = 8, @leftempid = NULL, @rightempid = NULL, @empname = 'I';
EXEC dbo.AddEmp @empid = 10, @mgrid = 8, @leftempid = 9, @rightempid = NULL, @empname = 'J';
EXEC dbo.AddEmp @empid = 11, @mgrid = 8, @leftempid = 9, @rightempid = 10, @empname = 'K';
EXEC dbo.AddEmp @empid = 12, @mgrid = 8, @leftempid = 11, @rightempid = 10, @empname = 'J';
EXEC dbo.AddEmp @empid = 13, @mgrid = 8, @leftempid = 11, @rightempid = 12, @empname = 'L';
EXEC dbo.AddEmp @empid = 14, @mgrid = 8, @leftempid = 13, @rightempid = 12, @empname = 'M';
EXEC dbo.AddEmp @empid = 15, @mgrid = 8, @leftempid = 13, @rightempid = 14, @empname = 'N';
EXEC dbo.AddEmp @empid = 16, @mgrid = 8, @leftempid = 15, @rightempid = 14, @empname = 'O';
EXEC dbo.AddEmp @empid = 17, @mgrid = 8, @leftempid = 15, @rightempid = 16, @empname = 'P';
EXEC dbo.AddEmp @empid = 18, @mgrid = 8, @leftempid = 17, @rightempid = 16, @empname = 'Q';
EXEC dbo.AddEmp @empid = 19, @mgrid = 8, @leftempid = 17, @rightempid = 18, @empname = 'E';
EXEC dbo.AddEmp @empid = 20, @mgrid = 8, @leftempid = 19, @rightempid = 18, @empname = 'S';
EXEC dbo.AddEmp @empid = 21, @mgrid = 8, @leftempid = 19, @rightempid = 20, @empname = 'T';
Then run the following code to show the current HIERARCHYID values and their canonical paths:
SELECT
empid,
REPLICATE(' | ', lvl) + empname AS emp,
hid,
hid.ToString() AS path
FROM dbo.Employees
ORDER BY hid;
You get the following output:
empid emp hid path
------ -------- ----------------- -----------------------
1 A 0x /
2 | B 0x58 /1/
4 | D 0x62C0 /1.1/
6 | F 0x6316 /1.1.1/
8 | H 0x6318B0 /1.1.1.1/
9 | | I 0x6318B580 /1.1.1.1/1/
11 | | K 0x6318B62C /1.1.1.1/1.1/
13 | | L 0x6318B63160 /1.1.1.1/1.1.1/
15 | | N 0x6318B6318B /1.1.1.1/1.1.1.1/
17 | | P 0x6318B6318C58 /1.1.1.1/1.1.1.1.1/
19 | | E 0x6318B6318C62C0 /1.1.1.1/1.1.1.1.1.1/
21 | | T 0x6318B6318C6316 /1.1.1.1/1.1.1.1.1.1.1/
20 | | S 0x6318B6318C6340 /1.1.1.1/1.1.1.1.1.2/
18 | | Q 0x6318B6318C68 /1.1.1.1/1.1.1.1.2/
16 | | O 0x6318B6318D /1.1.1.1/1.1.1.2/
…
As you can see, even though the tree is only three levels deep, some of the HIERARCHYID values became quite long due to the insertion order of siblings.
The solution that normalizes the values involves the following steps:
· Define a CTE called EmpsRN that calculates for each node a row number partitioned by parent ordered by current hid value.
· Define a recursive CTE called EmpsPath that iterates through the levels of the tree, starting with the root node, and proceeding to the next level of children in each iteration. Use this CTE to construct a new canonical path for the nodes. The root should be assigned with ‘/’, and for each node in the next level concatenate the parent’s path, the current node’s row number that represents its position under the parent, and a ‘/’.
· Join the Employees table with the EmpsPath CTE, and overwrite the existing hid values with the new ones that are converted from the new canonical paths.
Here’s the code that performs this normalization process:
WITH EmpsRN AS
(
SELECT
empid,
hid,
ROW_NUMBER() OVER(PARTITION BY hid.GetAncestor(1) ORDER BY hid) AS rownum
FROM dbo.Employees
),
EmpsPath AS
(
SELECT empid, hid, CAST('/' AS VARCHAR(900)) AS path
FROM dbo.Employees
WHERE hid = HIERARCHYID::GetRoot()
UNION ALL
SELECT C.empid, C.hid,
CAST(P.path + CAST(C.rownum AS VARCHAR(10)) + '/' AS VARCHAR(900))
FROM EmpsPath AS P
JOIN EmpsRN AS C
ON C.hid.GetAncestor(1) = P.hid
)
UPDATE E
SET hid = CAST(EP.path AS HIERARCHYID)
FROM dbo.Employees AS E
JOIN EmpsPath AS EP
ON E.empid = EP.empid;
Now query the data again after normalization:
SELECT
empid,
REPLICATE(' | ', lvl) + empname AS emp,
hid,
hid.ToString() AS path
FROM dbo.Employees
ORDER BY hid;
And you get nice and compact values:
empid emp hid path
------ -------- ------- ------
1 A 0x /
2 | B 0x58 /1/
4 | D 0x68 /2/
6 | F 0x78 /3/
8 | H 0x84 /4/
9 | | I 0x8560 /4/1/
11 | | K 0x85A0 /4/2/
13 | | L 0x85E0 /4/3/
15 | | N 0x8610 /4/4/
17 | | P 0x8630 /4/5/
19 | | E 0x8650 /4/6/
21 | | T 0x8670 /4/7/
20 | | S 0x8688 /4/8/
18 | | Q 0x8698 /4/9/
16 | | O 0x86A8 /4/10/
…
Cheers,
BG
